How To Make A Simple and Inexpensive Collapsible Photography Lightbox

Share It!

New fancy-pants camera.  Check.

New fancy-pants lens. Check.

New fancy-pants collapsible photography lightbox.  NEVAH!  OK, maybe not never ever, but certainly not right now.  Especially since I can whiz-bang that thing together in just over an hour.

For those of you following the Shoot I Do series, the next one is coming, but I thought I’d throw this fun and inexpensive tutorial out here first.

Are you ready to build your very own lightbox for under $20?


5 pieced of stiff white poster board-sized foam board (Hobby Lobby)

1 package of Velcro (Hobby Lobby)

3 pieces of pearlized (no pattern) white vellum paper (Hobby Lobby)

Utility knife

Scotch tape

Hmmm, for a gal who gets itchy inside of Hobby Lobby, I sure did spend a lot of time there.

To the lightbox!

This is the foam board.  As you can see it’s thick.  What you can’t see is that it is also sturdy.

Make a Collapsible Photography Lightbox

Velcro!  The Velcro package came with two ribbons of material.  One fabric-like, one Velcro-y like.  This is the Velcro-y one.  It had a sticky tape backing, so I simply cut to size and took off the protective backing, then stuck it to the bottom of three boards.

Make a Collapsible Photography Lightbox

As you will see in a minute, the boards will be “standing” and this is the bottom portion with one side of the Velcro stuck in place.  Please take note of my imperfect cuts.  JUST DO IT, BABY!

Make a Collapsible Photography Lightbox

Here we have the other ribbon of the Velcro material…the softer material that will attach with a strong grip to the stuff I already stuck to my boards.

Make a Collapsible Photography Lightbox

At this point, I have my original pieces stuck to the bottom and tops of my boards that will make up the backside of the box.  I’ve cut a longer portion of the second Velcro material to attach the pieces together.

Make a Collapsible Photography Lightbox

Now my three pieces of boards are attached to each other and form the bulk of the box.  Standing!

Make a Collapsible Photography Lightbox

Aerial view.  Also note I constructed this box on the floor.  I likes to get all in it and building it on the floor allows me that fun.

Here you also see the bottom board which looks attached, but in reality I just slid it into place. While I thought about cutting the side pieces to match the width of the bottom piece, it turned out just fine the way it was.  Feel free to modify yours to get a more boxy look.

Make a Collapsible Photography Lightbox

See? Easy!Make a Collapsible Photography Lightbox

I decided to only attach the two side pieces and one back piece, while keeping the top and bottom loose, allowing me freedom to conform the box as I see fit.  At this point, I’m ready to cut some holes in the sides and top to let the light in.

Make a Collapsible Photography Lightbox

So many DIY lightboxes use tissue paper to diffuse the incoming light, but I knew that wouldn’t work for me because I’m kinda like a well-intentioned gorilla around fragile stuff.  “Did I do that?!”

I knew I wanted something sturdier that could stand the test of Patti!  So, I used a pearlized white vellum paper.

It’s very popular to use vellum on wedding invites.  It’s a bendy, stiff, almost see-through paper.  While vellum comes in all kinds of patterns, you want the pearlized with no pattern.  Diffusing light is what you’re after.  No patterns or colors, unless that’s what you’re after.

Because the only vellum I could find was the size of a standard piece of paper, I knew if I measured my hole the same size, the paper would be too small.  Husband suggested I take a regular piece of paper, cut down the sizes a bit, then use that to trace for my holes.  That way, when I places the vellum over the open spaces, it would cover completely without falling through.

Measuring…(note the antique ruler!)

Make a Collapsible Photography Lightbox

Cutting success! As you can see, the vellum (back piece) is bigger than the one I’ll trace with.

Make a Collapsible Photography Lightbox

After tracing, I went to work with my utility knife.  Note the raggedness.  This hole does not need to be perfect, but I’ll understand your OCD if you work to get it so.  As for me: GOOD ENOUGH!

Make a Collapsible Photography Lightbox

NOTE: While I would prefer bigger holes, until I find vellum in a bigger size than a standard sheet of paper, I had to go with what I could find.  If I rigged two pieces together, the seam would cast a shadow, so that was a no-go.

I taped the vellum to the outside of the sides and top, reconstructed my box, and BAM! ready for business.  Also, remember how I didn’t cut the sides to match the width of the bottom piece?  Well, I found if I slid in one more foam board for the bottom (I had two more…just in case) it gave me a larger field to work within.  The arrows are pointing to where the pieces of foam board abut.  In the future, I may cut down the pieces and center my side openings, but until then…this collapsible lightbox works just as I had hoped.

Make a Collapsible Photography Lightbox

Your light sources can be small desk lamps that flex to fit your opening’s height.  While I’m using a light source from above, Boy has informed me that he has used a light box with success without a lamp above.  YOUR CALL!

Make a Collapsible Photography Lightbox

When I was done constructing the box, I simply unstuck the Velcro from the two side pieces and stacked all the boards and stored them in a corner standing up. (I’m keeping it real and didn’t clean up the area to make it picture perfect…this is how and where it’s stored!)

Make an Inexpensive Collapsible Photography Lightbox

Here’s the first pic I took using the box:

Easy Cheesecake Pie


While I prefer natural lighting, some days or nights, it’s just not possible.  A lightbox allows more flexibility when it comes to taking pics of ALL THE THINGS (well, all the food things) for this site…FOR YOU!  I mean, why should I hog the drool?

When I saw the first test shots using the box, I was relieved and giddy all in one.  Relieved that I didn’t ruin the box with my bull-in-a-china-shop ways and giddy because, well, there was Cheesecake Pie in my lightbox!

See how easy it is to make a simple lightbox?  If I can do it, you can do it.

Get to constructin’, my babies!




Share It!


  1. good work but more than i would do

    • Mrs. Tucker says

      My alternative method is so much lazier, but I find when I need better lighting, nothing beats the box.

  2. Awesome!! I have used one white panel before to lighten things up but I love this!

    • Mrs. Tucker says

      I use a white panel when i can get away with it, but even in sunny Texas, sometimes you need more light!

  3. I’ve done something like this except mine was made out of a cardboard box & fabric. It wasn’t as well crafted as yours is!

  4. Such a great idea! I would love it if you joined and contribute your awesome posts at my link party at City of Creative Dreams on Fridays 😀 Hope to see you there at City of Creative Dreams Link Party

  5. This is awesome! I have horrible lighting in my house. Bad window placement plus trees and more make it hard to take fun photos sometimes. i will try this out!

  6. You rock! I am so making one of these for those days when the light is never quite right and I’m tired of waiting on it!

    I would love for you to share your creativity on my Show-Licious Craft & Recipe Party! It’s going on right now and starts each Saturday at 8:00 am EST!

    ~ Ashley

  7. This is such a great idea! I can’t wait to make mine. I’m new to the blogging world and need all the help I can get with pictures. I’m glad I found your link through the Create Link linky party. I’d love you to stop by our blog and share some tips! Thanks!

  8. I lurve this. Sheer (vellum) genius. PINNED. Thank you for bringing it to Treasure Box Tuesday!

  9. I’ve been experimenting with different boxes and platforms to house my food photos. Your box is pretty amazing!

  10. Never used a box before- thanks for making it look worthwhile. BB2U

  11. Pinned. Going shopping, like the idea of flat storage.

  12. This light box looks quick and easy to make and easy to store. Thank you for the tutorial! I am pinning it.

  13. I have thought about making a light box several times and just never took the time to do it. I usually just prop the foam core board up and have had to try to wipe frosting, chocolate, and cream off of it several times because it’s always falling over on my food. This is such a great idea so I guess a trip to Hobby Lobby is in my future. LOL

    • Mrs. Tucker says

      I’ve had the same thing happen to me. There are times I still use a foam board and not the box, but only if the light is great to begin with. Good luck!

  14. Thank you so much for sharing your creativity with us at Show-Licious Craft & Recipe Party! Join us again on Saturday morning at 8:00 am EST!

    ~ Ashley


  1. […] Yes. Probably not. Because you want, nay, MUST, know what craziness is happening in OMT’s brain!  (last time I left you guys, I had a relatively normal photography post about making a lightbox) […]

Leave a Reply to Kathi Riemer Cancel reply


This site uses Akismet to reduce spam. Learn how your comment data is processed.